...
首页> 外文期刊>Chemical Engineering Research & Design: Transactions of the Institution of Chemical Engineers >Development of a microfluidic unit for sequencing fluid samples for composition analysis
【24h】

Development of a microfluidic unit for sequencing fluid samples for composition analysis

机译:开发一个微流体单元进行测序液体样品进行成分分析

获取原文
获取原文并翻译 | 示例
           

摘要

Amicrofluidic sample-sequencing unit was developed as a part of a high-throughput catalyst screening facility.It may find applications wherever a fluid is to be selected for analysis from any one of several sources,such as microreactors operating in parallel.The novel feature is that the key components are fluidic valves having no moving parts and operating at very low sample flow Reynolds numbers,typically below 100.The inertial effects utilized in conventional no-moving-part fluidics are nearly absent; instead,the flows are pressure-driven.Switching between input channels is by high-Reynolds-number control flows,the jet pumping effect of which simultaneously cleans the downstream cavities to prevent cross-contamination between the samples.In the configuration discussed here,the integrated circuit containing an array of 16 valves is etched into an 84mm diameter stainless steel foil.This is clamped into a massive assembly containing 16 mini-reactors operated at up to 400 deg C and 4 MPa.This paper describes the design basis and experience with prototypes.Results of CFD analysis,with scrutiny of some discrepancies when compared with flow visualization,is included.
机译:Amicrofluidic sample-sequencing单位了作为一种高通量筛选催化剂的一部分设施。流体从任何一个被选择进行分析的几个来源,如微反应器并行操作。的关键组件是射流阀没有移动部件和操作以非常低的样本流雷诺数,通常低于100。利用传统的惯性效应no-moving-part流体中几乎不存在;相反,流的驱使。由high-Reynolds-number输入通道之间控制流,射流泵效应的同时清理下游蛀牙防止交叉污染之间的样本。集成电路包含一个数组的16阀门是蚀刻成一个84毫米直径的不锈钢钢箔。组装包含16个核反应器持续运营400摄氏度和4 MPa。设计基础和经验原型。的差异相比,流可视化,包括在内。

著录项

相似文献

  • 外文文献
  • 中文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号