Cu doped DLC films were deposited by combined ECR microwave plasma enhanced chemical vapor deposition method and mid-frequency magnetron sputtering method in order to improve the stress and heat conduction of DLC films. The effects of sputtering current on the Cu content, surface morphology, structure and mechanical properties of the films were investigated. The results show that the metal content in DLC films can be modified efficiently by just changing sputtering current. Raman spectroscopy results show that all the prepared samples have the typical DLC structure. The hardness and wear resistance of Cu-DLC films are decreased because of the incorporation of Cu. However, Cu-DLC films with better structure and mechanical properties can be obtained under a certain sputtering current.%为改善DLC膜的内应力及导热问题,采用ECR微波等离子体化学气相沉积及中频磁控溅射的方法制备掺Cu类金刚石膜,研究溅射电流对薄膜中Cu含量、薄膜表面形貌、结构及机械性能的影响.结果表明:改变溅射电流能有效地控制类金刚石膜中金属含量,拉曼光谱显示,制备的薄膜为典型的类金刚石薄膜结构；Cu的掺入使得类金刚石膜的硬度和耐磨损性能下降,但在一定溅射电流下可得到薄膜结构及机械性能均较好的掺Cu类金刚石膜.
展开▼
